To see the results of our testing, check out the links below:
CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position for you.
Simply stick the CLIQR Device Adaptor onto the back of your device and CLIQR it into the mount in the orientation that suits you.
Scroll down to see the full CLIQR range
Handlebar Mount
Designed specifically for 22mm handlebars, with a hinged clamp and M5 bolt for a secure hold.
The CLIQR Handlebar Mount allows you to mount your device beside your controls for convenient viewing at a glance, perfect for navigating on the move.
Scroll for more
Cable-Tie Mount
The CLIQR cable tie mount is a multi-use system that can be fitted in hard-to-reach areas, as well as on multiple diameter tubes.
It offers a low profile mounting system using cable ties and a 3M pad.
Scroll for more
Swipe for more
Headstock Mount
The CLIQR headstock mount is designed for use on bikes with clip-on bars. It is supplied with 5 TPR rubber adaptors to fit most
headstocks, allowing for a clean central mounting position.
Scroll for more
Swipe for more
1" Ball Mount
The CLIQR 1" ball mount fits any 1" ball cup to adapt other mounts to the CLIQR system and allow for 360° rotation.
Scroll for more
Mirror Mount
The CLIQR mirror mount uses a 360° rotating head and 4 TPR rubber shims to fit mirrors stems of 10mm, 12mm, 14mm, 16mm and adjust to the angle that suits you.
Scroll for more
Mirror Replacement Mount
Utilises your mirror stems to create a clutter-free mounting solution.
Scroll for more
Swipe for more
Handlebar Pivot Mount
Combining the bestselling 22mm handlebar mount with a cast aluminium twin spar pivoting arm,
the CLIQR Handlebar Pivot Mount offers our most convenient fit with 360 degrees of rotation.
Scroll for more
Forward Mount
The CLIQR Forward Mount offers the ideal aerodynamic position with a robust yet lightweight glass-filled Nylon body and durable stainless steel fixtures.
Scroll for more
Universal Handlebar/Stem Mount
The CLIQR Universal Handlebar/Stem Mount is a multi-use mount that can be fitted in hard-to-reach areas, as well as on multiple diameter tubes. It offers a low profile mounting system using cable ties and a 3M pad.
Scroll for more
Cycling Stem Cap Mount
The CLIQR Stem Cap Mount offers the most discrete and central mounting position for biking adventures. Replacing the existing bikes Stem Cap with the lightweight and durable CLIQR mount.
Car vent mount
The CLIQR car vent mount uses dual vent mounting clamps to securely hold your device in either landscape or portrait mode
Scroll for more
Heavy Duty Surface Mount
Designed to withstand the extreme forces of extreme sports.
Scroll for more
Universal Pivot Mount
The CLIQR Universal Pivot Arm can be used with any other CLIQR mount,
to offer our most convenient fit with 360 degrees of rotation.
Scroll for more
Surface mount
The CLIQR surface mount uses powerful 3M VHB tape to attach to any flat surface, such as motorcycle fairings dashboards, surfboards, or even around the house.
Scroll for more
Action camera mount
The CLIQR action camera mount screws on to your action camera and allows you to mount it on your chosen CLIQR system just like any other device.
Perfect for motorcycle, bicycle and other leisure activities.
Scroll for more
Heavy duty adaptor
Designed for those who want extra security when using large phones or tablets
Weight limit: 8kg
Download instructions
Spare device adaptors x2
Additional device adaptors for those with multiple devices to mount
Weight limit: 2kg
Download instructions
Coming Soon
Keep an eye out for new products coming soon
USB Handlebar Mount
USB Converter
Riser Mount
Yes, the Cliqr mechanism has been extensively tested through computer simulation, on the road and in our test lab. The mechanism can hold a peak tensile force of 600N (60KG)
The spring is only stretched to 5% of its capacity. However in the unlikely event that the spring fails the mechanism will remain mechanically closed using the small tooth on the actuation lever.
No, Oxford only use genuine 3M VHB tape. Any residue left behind by the glue can be wiped off using an alcohol-based cleaner
To rotate the lever position of Cliqr simply unscrew the 2 Hex head bolts rotate the mechanism and screw it back down. Ensure the mount is secure before use.
Wait at least 24 hours before using the Cliqr to ensure a strong bond.
Yes, at 100mph wind force is roughly 120KG per square meter. The Average phone has a surface area of 0.0120M2 so the wind force would be roughly 1.5KG. The small adaptor has been tested to comfortably hold a tensile load of 30kg and the large adapter has been tested to comfortably hold a tensile load of 50kg
No, do not use the adaptor more than once as the 3m adhesive pad will be less effective once removed and reapplied. 2 adaptors are supplied with each device mount. Extra adaptors are available from your Oxford supplier.
Yes. The large adaptor can be used on a phone if you prefer the added security.
Yes, the mechanism uses stainless steel parts throughout and the 3M is completely waterproof.
Oxford does not make a phone case as the main benefit of Cliqr is the universal nature of it.
Yes, the best tool to remove the adaptor is a fishing line however a sharp fine edge will also work.
The small adaptor is recommended for up to 3.5kg and the large adaptor for up to 5.5kg.
They adhere to most phones, tablets, and cases. They sometimes have trouble sticking to silicone, leather and some highly textured cases