OX841 // Cycle
The CLIQR Universal Forward Mount offers the ideal aerodynamic position with a robust yet lightweight glass-filled Nylon body and durable stainless steel fixtures.
Universal adaptor with VHB 3M™ tape
Tough but lightweight mounting system provides an optimal viewing position for your device
Compatible with most phones, phone cases, GPS devices and compact action cameras
Quick and easy to install, with all fittings included
Fits 31.8mm and 25.4mm stem / bar
"This is ideal for around-town riders who need to attach and remove their devices frequently and quickly." - MotoGusto
CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position for you. Simply stick the CLIQR device adaptor onto the back of your device and CLIQR it into the mount in the orientation that suits.
CLIQR range is manufactured from glass-filled nylon due to its superior mechanical properties, light weight and durability.
CLIQR is extensively tested both in house and via external bodies to ensure you that your device is safe whilst mounted. To see the results of our testing, check out the links:
Mount Strength
Adhesive Strength
Yes, the CLIQR mechanism has been extensively tested through computer simulation, on the road and in our test lab. The mechanism can hold a peak tensile force of 600N (60KG).
The spring is only stretched to 5% of its capacity. However in the unlikely event that the spring fails the mechanism will remain mechanically closed using the small tooth on the actuation lever.
No, Oxford only use genuine 3M VHB tape. Any residue left behind by the glue can be wiped off using an alcohol-based cleaner.
To rotate the lever position of CLIQR simply unscrew the 2 Hex head bolts rotate the mechanism and screw it back down. Ensure the mount is secure before use.
Wait at least 24 hours before using the CLIQR to ensure a strong bond.
Yes, at 100mph wind force is roughly 120KG per square meter. The Average phone has a surface area of 0.0120M2 so the wind force would be roughly 1.5KG. The small adaptor has been tested to comfortably hold a tensile load of 30kg and the large adapter has been tested to comfortably hold a tensile load of 50kg
No, do not use the adaptor more than once as the 3m adhesive pad will be less effective once removed and reapplied. 2 adaptors are supplied with each device mount. Extra adaptors are available from your Oxford supplier.
Yes. The large adaptor can be used on a phone if you prefer the added security.
Yes, the mechanism uses stainless steel parts throughout and the 3M is completely waterproof.
Oxford does not make a phone case as the main benefit of CLIQR is the universal nature of it.